Categories
WW1 British Prototypes

Tank Mark VI

United Kingdom (1917-1918)
Heavy Tank – 1 Wooden Mock-up Built

The Commander’s Post Battle Conference

On 16th June 1917, a conference was held at the 2nd Brigade Headquarters to discuss what happened at the Battle of Arras. Minutes were made of the points discussed. All the Battalion and Brigade commanders were present. Features of the Mark VI tank were discussed. They were all asked the question “Is the Male tank of more assistance to the infantry than the female?”
Wooded mock-up of Mark VI tank. Designed after Battle of Arras, it was an improved Mark V with greater speed, lighter loading and more ease of control
Wooded mock-up of Mark VI tank. Designed after Battle of Arras, it was an improved Mark V with greater speed, lighter loading and more ease of control. Not proceeded with. Note that it was to have one 6-pounder in front, instead of two in sponsons – Source: Imperial War Museum London Q14521 and Q14567
The group answer to that question was, “Female Tanks will kill more of the enemy – Males frighten them more. Agreed that one type of tank with 6-pdr gun in front will probably be the best pattern. Though the 6-pdr gun will have a small arc of fire, it should be capable of being used effectively with an improved pattern of tank. The tank must be more mobile for this. The tank will be lighter and this is considered worth doing so as to ensure being able to close with the enemy, and having a tank not so liable to be ditched.”
This report would have been submitted to the British High Command. The troops wanted a tank designed like the MK.VI. What they did not realize was that it had already been designed and a wooden mock-up built back in England.
It was going to be an improved Mark V with greater speed, lighter loading and more ease of control. The most radical design feature was that the Mk.VI tank had one 6-pounder gun in the front, instead of two in sponsons.
All-around defense was provided by 6 Hotchkiss machine guns with 10,000 rounds of ammo among them. The Ricardo engine was moved to the side, and the crew compartment was raised, allowing for a compact crew space.
What is interesting about the design is that it featured a new raised cabin that would eventually be used on the Mark VIII. There were four machine guns in ball swivel mounts: two to the front and two to the rear. On the front of each side of the hull, two small machine gun sponsons were fitted.
The tracks were to be widened to 750 mm. An order for 600 Mk.VI tanks was placed, to become a part of the recently formed American tank corps. The order was canceled when the Mk.VIII was chosen instead. The furthest the Mk.VI got to being built was a full-scale wooden mock-up.
On 23rd June and 13th July 1917, it was shown to the Military and members of the War Department along with two other wooden mock-ups: the Mark V tank and the Gun Carriage Tank. The Mark V entered production but, like the Mk.VI tank prototype, the Gun Carriage was not proceeded with.

The need for change

During the winter of 1916-1917, the British Army future tank design requirements were mainly in respect to an increase in armor protection and armament. As they gained more experience in the deployment of tanks on the battlefield, the calls for more technical improvements in performance became more pressing. Lt-Colonel Stern from the Ministry of Munitions was more concerned with the production of as many tanks as possible and getting them transported to France.
Walter Wilson as Director of Engineering was looking towards the next improved versions of the tank. In the winter of 1916-17, he started work designing two new tanks, the Mk.V and the Mk.VI. His eagerness to show off these new designs would bring him in conflict with Stern, whose view was “Any tank is better than no tank.”
The two main performance issues with the earlier tanks were the lack of power of the engine and how it steered. The Mk.I to Mk.IV tanks needed four people to work the driving and gear changing mechanism correctly. In the Mark V and Mark VI tanks, only one person would be needed to change gear and drive the tank. With an epicyclic gearbox, the driver alone could control the tank and the commander was freed from the duty of working the steering brakes.
The proposed new Ricardo crosshead valve, water-cooled straight six 19-litre petrol engine would supply 150 hp. It was more powerful than the Foster-Daimler, 6-cylinder in-line sleeve valve 105 hp petrol engine fitted in the early tanks. This new engine was going to be used to power the Mark VI tank.
The Mark VI tank was Wilson’s idea. Side sponsons caused problems when tanks were transported by rail. The early tanks had their sponsons unbolted for train travel. On later versions, the sponsons could be pushed inwards. His new design did away with bulky side sponsons thus making transportation to the battlefront easier.
The new Mark VI tank would have a single 6-pdr gun firing straight forward between the ‘horns’ while the rest of the crew would work in an elevated structure in the middle of the tank firing machine guns.
One of the reasons the Mark VI tank did not enter production was the fact that the factories would have to be ‘rejigged’ as the engine position would have to be shifted from the middle of the tank to one side. The time needed to do this work and the cost was not looked on favorably.

The Side Sponson

Side machine gun sponson on the Mark VI tank
The side machine gun sponsons on both sides were smaller than those on the Mark IV tank. They were also moved a lot more forward. The angled box section at the base of the sponson had a slit at the bottom to allow spent machine gun cartridges to fall out onto the earth outside the tank.


The Mark VI British tank never went into production. This is a ‘what-if’ illustration by David Bocquelet and Craig Moore. It is based on the Mark V tank chassis as both the Mk.V and Mk.VI wooden mock-ups were shown at the same time. If it entered production it would have seen service in 1918 and therefore be painted khaki earth brown and have the white, red and white Allied identification stripes on the nose. You can just see the barrel of the hull mounted 6pdr gun at the front of the tank.
Mock-up of proposed Mark VI Tank
Mock-up of proposed Mark VI Tank (see also Q 14521). It was meant to have wider tracks, one 6-pounder gun in front, six Hotchkiss guns in a fixed turret, and 150 h.p. Ricardo engine. Mock-up inspected 23rd June and 13th July, 1917, but no decision was reached as to manufacture – Source: Imperial War Museum London Q14566

The 6pdr Gun

6pdr gun ot the front of the Mark VI tank
Only one QF 6 pdr (57 mm) gun (64.7cm short barrel) was fitted to the Mk.VI tank – Source: IWM Q14521 – Q14567

The Tank Tower

Mark VI tank tower
The Mark VI’s tower was a proeminent feature. It housed 4 machine-guns.
Tank Tower machine guns
There were four machine guns in ball swivel mounts: two to the front and two to the rear.

Sources

Walter Wilson – Portrait of an inventor by A.Gordon Wilson
Imperial War Museum London
The New Excalibur by A J Smithers

Mark VI specifications

Dimensions Length 26ft 5in (8.05m).
Width 8ft 4in (2.53m).
Height 8ft 8in (2.64m)
Total weight 27 tons
Crew 8
Propulsion Ricardo crosshead valve, water-cooled straight six petrol engine, 150hp @ 1250rpm
Road Speed 4.6 mph (7.4 km/h)
Range 45 miles (72.42 km)
Trench Crossing ability 10ft (3.04m)
Armament QF 6 pdr (57 mm) gun (64.7cm short barrel)
6x 0.303 inch (7.62mm) Hotchkiss air-cooled machine guns
Armor From 8 to 16 mm

Tank Hunter WW1
Tank Hunter: World War One

By Craig Moore

The First World War’s fierce battles saw the need to develop military technology beyond anything previously imagined: as exposed infantry and cavalry were mowed down by relentless machine-gun attacks, so tanks were developed. Stunningly illustrated in full colour throughout, Tank Hunter: World War One provides historical background, facts and figures for each First World War tank as well as the locations of any surviving examples, giving you the opportunity to become a Tank Hunter yourself.

Buy this book on Amazon!

Leave a Reply

Your email address will not be published. Required fields are marked *