Categories
WW2 British Prototypes

Vickers No.1 & No.2 Tanks

United Kingdom (1921)
Tank – 2 Prototypes Built

In early 1921, the British government’s Tank Board and its General staff representative Colonel John Frederick Charles Fuller were considering their next tank design. The result of their deliberations resulted in a set of very loose requirements. These requirements stated that this new tank would need to be usable in the tropics. The policy gave a list of areas that were seen as likely to be trouble spots in the future which included the Balkans, Russia, India, and South America. The latter two regions were the cause for the ‘tropics’ requirement. Furthermore, it was envisioned that the best way to combat a tank was with another tank.
Col. Fuller discovered that the Master General of Ordnance (MGO) had been working with the firm of Vickers on a new tank. He was shocked and saw it as a usurpation of his authority when in reality it was not. Col. Fuller has, in some of his works, tried to portray himself in a good light, and a British tank of this period that did not have his oversight would be rather difficult to explain, especially when he was involved with the failing Department for Tank Design and Experimentation, run by Philip Johnson.
The MGO ordered three prototypes of the new tank design to be built, these were constructed at the Vickers Erith plant near London. The first being completed and delivered to the Mechanical Warfare Experimental Establishment (MWEE) in Farnborough for trials in November 1921.

Vickers No.1 Tank. Photo: Crown Copyright expired

Description

The No.1 tank was a rhomboid in shape, with a striking resemblance to a miniaturized First World War tank, although the front was more curved. On top of this sat a superstructure, with a semi-circular front. The sides of the superstructure were inside the width of the track run. On top of this superstructure was a domed turret, with a centrally placed cupola. Three barbettes were placed every 120 degrees within the turret, these held ball mounts for Hotchkiss machine guns. A fourth ball mount was placed in the turret roof for anti-aircraft work.

The driver sat at the front, in a chair that was described as ‘sumptuous’, and had ‘barber chair’ like controls to get the perfect driving position. The controls featured a large steering wheel, with two circular wheels for adjusting the transmission and which could, in theory, have a continuously variable number of gears.

These gears were provided by a Williams-Jenney hydraulic transmission, made by Variable Speed Gears Ltd. of Crayford, London. This was the same model of transmission that had been fitted to the failed Mk.VIII Tank. And which had originally been used onboard ships to power winches. Power was provided by a six-cylinder Wolseley engine, located behind a firewall at the rear of the vehicle. The tracks were extremely basic design being nothing more than a flat plate with a pressed indentation which was filled with a wooden sole plate.

Williams-Jenney hydraulic transmission at Dollis Hill. Photo: Crown Copyright expired

The trials

When the No.1 tank was completed Vickers decided it was too noisy and not reliable enough but despite this it was still sent to the MWEE at Farnborough for trials. There it was found that the transmission was prone to severely overheating. One of the tests the tank was subjected too was a race between the No.1 tank and the Light Infantry Tank and, according to Col. Fuller, a Medium D. The No.1 tank lost and came dead last. In 1922, the No.1 tank was returned to Vickers and fitted with better tracks and a more powerful engine. In March of the same year, she was handed back to the War Office. However, no further tests were carried out, and by March 1923 she was listed as derelict and in the tank testing sections stores.

Shot of the rear of the No.1 tank, you can see the access ports to the engine and transmission, as well as the basic track design. Photo: Crown Copyright expired


The Vickers No.1 Tank armed only with machine guns.

The Vickers No.2 Tank armed with the 3-Pounder 47mm Gun and a Hotchkiss machine gun
Both Illustrations are by William ‘Rhictor’ Byrd, funded by DeadlyDilemma through our Patreon Campaign.

The No.2 Tank

Vickers No.2 tank was published in The Tank - Journal of the Royal Tank Regiment This drawing of a Vickers No.2 tank was published in The Tank – Journal of the Royal Tank Regiment October 1948.

Work started on the No.2 tank in July 1922 and would be completed in July 1923. There was one big change in this design over the No.1 tank. On the 15th March 1922, the Director General of Artillery’s (DG of A) office issued an order that all future tanks must be armed with a quick firing (QF) gun. Thus, the No.2 tank was equipped with a 3-pounder (47mm) gun. This was a higher velocity weapon than was normally fitted to tanks of the period and followed the General Staff policy about countering other tanks. This combination of policy and dedicated high-velocity armament means that the No.2 tank was likely the first ever tank to be armed to fight other tanks.

The Vickers No.2 was also armed with a Hotchkiss machine gun. It could be fired from one of three positions in the turret. An anti-aircraft mount was fitted in the turret roof and the machine gun could be used in that mount to fire upwards at threats from the sky. 6,000 rounds for the machine gun found be stored inside the tank along with 50 3-pdr rounds.

Hydraulic steering was by a pair of Williams Janney V.S.G.s, handwheel controls. The suspension used articulated bogies with springs in vertical trunk guides. The front and rear single rollers had independent springing.

During trials at the MWEE it was discovered that “the hydraulic variable speed gears which formed the cross drive were not suited to this application, being much overloaded,” The Vickers No.2 machine was scrapped in 1927.

The No.2 tank, you can see in this picture the rear access ports are wide open. This is an attempt to cool the transmission. The cooling problem was down to the oil in the hydraulic system rapidly becoming overheated. Photo: Crown Copyright expired

The third machine ordered was built as a gun carrier, with a field gun being loaded onto the bed through a ramp at the rear of the tank. Some websites claim that this prototype led to the Dragon gun tractors, although no hard evidence has been advanced for this theory.

Conclusion

Although ultimately the Vickers No.1 and No.2 failed to produce a successful design, it was likely one of the world’s first modern tanks, taking design features from the Renault FT, such as rear-mounted engine behind a firewall and a single weapon in a turret. Yet it refined these ideas, increased the crew size to something respectable, and included a gun designed for hunting and killing enemy tanks. The idea that the best counter to a tank is another tank is today widely accepted as a truism. Just a handful of years after the tank had been developed this was considered a new concept, one which ultimately proved right.
It should be mentioned here that the speculation on the role of the No.3 machine might have a part to play. There is a theory, although at the time of writing an unfounded one, that the Dragon gun tractor led to the development of the Vickers Medium Mk.I. If this is the case then the No.1 and No.2 were even more important as designs than originally thought.

Specifications (No.1 & No.2 tanks)

Total weight, battle ready 8.75 – 10 tons
Crew 5
Propulsion No.1: Wolseley six cylinder, Water-cooled, 73hp petrol engine
No.2: Lanchester 40, Six Cylinder, Water-cooled, 86hp petrol engine
Speed 15 mph (24 km/h)
Fuel capacity 100 Gallons
Range 120 miles (190 km)
Armament No.1: 4x Hotchkiss machine guns
No.2: 1 x QF 3-pdr (47 mm/1.85 in) gun (50 rounds) , 1x Hotchkiss machine gun.(6,000 rounds)
Armour 1/4 inch
Turret Ring/td>

67 inches in diameter
Total production 2

Links & Resources

Mechanised Force: British Tanks Between the Wars, David Fletcher, ISBN 10: 0112904874 / ISBN 13: 9780112904878
The Tank – Journal of the Royal Tank Regiment June 1948
The Tank – Journal of the Royal Tank Regiment October 1948
tankarchives.blogspot.com
tank100.com

Forgotten Tanks and Guns of the 1920s, 1930s and 1940sForgotten Tanks and Guns of the 1920s, 1930s and 1940s

By David Lister

History forgets. Files are lost and mislaid. But this book seeks to shine a light, offering a collection of cutting edge pieces of historical research detailing some of the most fascinating arms and armament projects from the 1920s to the end of the 1940’s, nearly all of which had previously been lost to history.Included here are records from the UK’s MI10 (the forerunner of GCHQ) which tell the story of the mighty Japanese heavy tanks and their service during the Second World War.

Buy this book on Amazon!

Leave a Reply

Your email address will not be published. Required fields are marked *